Clone Samsung TV's with USB Stick

Introduction

In the event that a TV needs to be replaced, or a new TV needs to be added to the system, it can easily be cloned with a USB drive, which will automatically load the correct settings and configuration to access the VYTIO Server.

Samsung TV Cloning Procedure

  1. Turn TV on and insert USB drive in the USB slot in the back of the TV

  2. Select English as the default language

  3. Select Clone Product as the installation type

  4. If the TV properly reads the USB drive, USB Flash Drive will appear, and select this option

  5. The TV will begin downloading the necessary settings and configuration. Once complete, the TV will automatically reboot itself

  6. Remote the USB drive

  7. When the TV boots back up, and there is proper network connection, it will boot to Device on Server screen. Navigate to the Group Code and select

  8. Enter any number (has to be an integer) and select Done

  9. When prompted with the Clock Set screen, press the right arrow to skip

  10. Press Done on following page

  11. TV will go to the Samsung Home menu. Select URL Launcher to launch the Vytio Application

  12. Once the Vytio application is loaded, it will prompt for registration. Select the Location field and enter the TV name, then select Done

  13. Select Register

  14. The Vytio Application will reload itself, with its new registration, and go directly to the 1st channel in the lineup

Richard Chen